Specifications

Battery Low Beep Defines whether the system alarms when the battery level is low.
Resume On LAN Defines whether the system resumes from Standby when the LAN
device receives the packet. To wake your computer through your network, perform
the following steps after set this item to Enabled.
1. In System Properties dialog box, select Device Manager tab.
2. Double-click Network adapters; then SiS 900 PCI Fast Ethernet Adapter.
3. Select Power Management tab and check Allow this device to bring the computer
out of standby.
4. Click OK twice.
Resume On Modem Ring Defines whether the system resumes from Standby when
the built-in modem receives the call.
Resume On Time Defines whether the system resumes from Standby on the time
defined in Resume Time below.
Resume Time Sets the alarm for Resume On Time above using the format
hour:minute:second (24-hour format).
Boot menu
This menu defines where the system boots from. The system boots from the drive
appears on the top of the order. To change the order, use ↑ or ↓ key to select the
drive, and move it up with the space key and down with the minus key.
Hard Drive Booting from the hard disk drive
CD-ROM Drive Booting from CD-RW drive
Diskette Drive Booting from the floppy disk drive
Exit menu
Exit Saving Changes Saves the settings you have changed and exits the Setup
Utility.