Specifications

6
6-2
2. Insert the card into the slot with the label face up until it locks into place.
• You cannot use a Type II and a Type III PC card at the same time.
• When you use the Modem card, disable
COM1 Port
and
COM2 Port
in the
Advanced
menu of the Setup Utility. Otherwise, the Modem
card may not work properly.
Ejecting PC Card
• Some PC cards may become hot after long use
.
• Be sure to use the procedure below when ejecting a PC card.
Otherwise, the system may not work properly
.
1. Click icon on the task bar; then
Stop xxxxxxxx
, and click
OK.
2. Gently push in the PC card eject button to be pop out.
Label Face