Instruction manual

OPERATING_MANUAL_MC20V.DOC 18.03.11 KS Seite 8
Use as determined/liability
This casting machine is designed and manufactured to comply with the latest
technical knowledge and according to approved safety regulations. When not putting
into operation correctly or not using the machine as determined, however, danger
and damages may occur. Therefore we suggest reading carefully and completely this
manual before putting the machine into operation and to follow the instructions given
there:
This machine is only to be used for melting, casting of precious metals normally
used for the production of jewellery.
This machine may only be connected as mentioned in this manual. The mains
supply as well as in- and outgoing pressures are to be provided as stated on the
machine label.
This machine was designed for use in closed spaces (indoors) and may only be
used for the above-mentioned purpose.
Only original INDUTHERM consumable and spare parts are to be used.
The machine may not be modified in any way. Technical changes may only be
effected with INDUTHERM GmbH’s prior written permission.
Damages caused by disregard or false interpretation of the contents of this
instruction manual result in an immediate expiration of the machine guarantee.
This instruction manual is conform to the latest technical condition of the machine
when printed. Technical changes and fittings subject to change.
INDUTHERM GmbH cannot and will not take responsibility for any damages
resulting of the above mentioned.
This instruction manual may not even partially be reproduced (photocopy, micro
film, computer processing etc.) without prior written permission of INDUTHERM
GmbH.