Instruction manual

OPERATING_MANUAL_MC20V.DOC 18.03.11 KS Seite 7
The safety valves placed inside the machine housing may not be removed,
closed or altered in any way.
As melted metal is processed with this machine (= temperatures up to 2000 °C),
the utmost care and attention has to be applied when working with the Machine.
The following necessary safety clothing is principally to be worn:
- fireproof clothes
- fireproof closed shoes
- fireproof gloves
- safety goggles
Special caution is essential when working with graphite crucibles and graphite
dies because these are only visibly hot at temperatures above 500°C!
In commercial enterprises the regulations for the prevention of accidents of the
relevant authority for electrical machinery are to be followed.
People with pacemakers must not be near the machine while it is running.
A trained responsible personnel is to supervise work with this machine.
Before you start using the machine, the manual of the MC20V must be read and
comprehended.