Instruction manual

OPERATING_MANUAL_MC20V.DOC 18.03.11 KS Seite 15
On the left side shown:
Arrow up == active parameter (highlighted with white background)
changes to the parameter one level above
Arrow down == active parameter changes to the parameter one level
below ( here Pyrometer correction)
On the right side shown:
+ == changes set temperature to 1001
- == changes set temperature to 0999
Main page == display moves back
MC20V modify system parameter
If you start from the start page and you press“ Program setup“ for 5 seconds you get
access to the system paramter.
On the top level shown:
000:00015 == selected parameter == 000
value of parameter 00015: equals seven == pyrometer
If you press “Arrow up” you get access to the parameter 001 and higher.
By pressing “+” you change the value of parameter 000 to 1