Instruction manual

OPERATING_MANUAL_MC20V.DOC 18.03.11 KS Seite 14
MC20V modify program screen
On the top level shown:
0013 program == selected program to modify
1530°C Temperature == set temperature inside the crucible
115% Pyrometer correction == allows you to adjust displayed temperature (if
necessary)
100% Heating power == allows you to adjust displayed temperature (if
necessary)
0000 Washing before heating == washing cycles before heating (starts with
vacuum, then backfill to 0.0 bar with protective gas).
Number display the cycles that will be done.
Recommend for Paladium alloys (very reactive
alloys)
0001 Washing while heating == washing cycles during the machine heats
-0.90 bar Melting pressure == melting pressure set value in bell
00.5sec Casting pressure start == tilting angle to
2.00 bar casting pressure == casting pressure set value
0030 s Vibration == vibration time