Instruction manual

OPERATING_MANUAL_MC20V.DOC 18.03.11 KS Seite 13
3.3. Operation elements
MC20V screen when starting the machine
or "Temp. Edit"
On the middle section shown:
100°C == actual temperature
1530°C == set temperature
0.00 bar == actual crucible pressure (-1 to 2 bars)
0.0 kW == actual heating power in kW
3.5 == maximum heating power
13 Program == active program with name "18ct yello"
Manual == operation mode
On the left side shown:
Temp - == lower the set temperature even within a program
Temp + == rise the set temperature even within a program
Power Edit == changes display to achieve temperature or power
controlling (will change to temperature controlling )
On the right side shown:
Program - == go the the next program one place below (program 12)
Program + == go the the next program one place higher
Program setup == level to modify the selected program (here program 14)