Manualshelf

System information

ManualsBrandsSharp ManualsComputer equipmentPC-AV18
51525354555657585960
49
Useful adjustment settings
To watch an HDMI equipment image, select
“INPUT3” or “INPUT4” using TV/VIDEO on the
remote control unit or on the TV.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Option”.
3
Press
a
/
b
to select “HDMI Setup”, and then
press ENTER.
• The HDMI Setup can be selected only when
“INPUT3” or “INPUT4” is selected.
4
MENU
[
Option
...
HDMI Setup
]
Option
Game Play Time
Colour System
HDMI Setup
Fine Sync.
Audio Only
Output Volume Select
Input Select
DNR
DTV Menu
HDMI Setup
HDMI (High-Defi nition Multimedia Interface) terminal
selection.
Press
a
/
b
to select the desired item or
setting, and then press ENTER.
5
Enable/Disable
Digital/Analogue
Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Select “Digital” for audio signal
via the HDMI terminal. Select
“Analogue” for audio signal via the
AUDIO jack.
Auto View
Audio
Select
HDMI Setup
items
Selectable
items
Description
NOTE
• Refer to your external equipment operation manual for
these settings.
• “Audio Select” is only available for INPUT3.
PC Setup
Input Signal (PC input mode only)
• Some input signals may have to be registered manually to
display properly.
• The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Fine Sync.”, and then
press ENTER.
3
Press
a
/
b
to select “Input Signal”, and then
press ENTER.
4
Press
a
/
b
to select the desired input signal
on the display, and then press ENTER.
5
1024 x 768
1360 x 768
(Example)
1024
g
768 1360
g
768
Press
a
/
b
to select the desired setting, and
then press ENTER.
6
D53X_en_h.indd 49D53X_en_h.indd 49 2007-7-31 8:30:422007-7-31 8:30:42