Specifications

7
7-2
The following items can only be changed if you know the Supervisor password.
Advanced page All items
Set Supervisor Password
Password on Boot
Security page
Floppy Disk Access
Resume on Modem Ring
Power page
Resume on Time
Boot page All items
Exit page Load Setup Defaults
Setting the Password in the Setup Utility
1. In the Security menu of the setup utility, select Set Supervisor Password or Set
User Password and press Enter.
2. Type your password (up to eight characters), and press Enter.
3. Type the same password again, and press Enter.
4. When the confirmation message appears, press Enter.
5. Press Esc and select Exit Saving Changes.
6. Press Enter twice. The system restarts and asks for the password you have set.
If you use the computer personally
We recommend that you set the supervisor password. You can prevent other people
from using your computer by enabling Password on boot in the Security menu of
the setup utility.
If you share the computer with others
We recommend that a person who administers the computer sets both supervisor
and user passwords and lets the other people know only the user password.
Changing or Deleting the Password
1. In the Security menu of the setup utility, select the password item you want to
delete and press Enter.
2. Type your current password, and press Enter.
3. To change the password, type in the new password and press Enter. To delete
the password, just press Enter.