Specifications

3-10
3
Supporting System Hibernate
To support System Hibernate mode, make sure Enable hibernate support is checked
in Hibernate tab of Power Options Properties dialog box.
Entering System Stand by/Hibernate
Your computer will enter System Stand by/Hibernate under several sets of
conditions as follows:
• The System stand by/System hibernates timeout in the Power Options
Properties dialog box elapses.
• Hot keys Fn+F12 are pressed.
This functions if you perform the following:
1. In the Power Options Properties dialog box, select Advanced tab.
2. Select Hibernate or Stand By in When I press the sleep button on my
computer.
3. Click Apply and OK.
• The display cover is closed when no external monitor is connected to the
computer.
This functions if you perform the following:
1. In the Power Options Properties dialog box, select Advanced tab.
2. Select Hibernate or Stand By in When I close the lid of my portable
computer:
3. Click Apply and OK.
• The power button is pressed.
This functions if you perform the following:
1. In the Power Options properties dialog box, select Advanced tab.
2. Select Hibernate or Stand By in When I press the power button on my
computer.
3. Click Apply and OK.
• You select Stand by or Hibernate in Shut Down Windows dialog box.
Resuming from System Stand by/Hibernate
Resuming from System Stand by
Your computer will resume from System Stand by if you operate the computer
again.
Resuming from System Hibernate
Your computer will resume from System Hibernate if the power button is pressed.