Specifications

32
DRIVE THE MOTOR
6.1.2 Basic operation (factory setting)
*1
For the details of operation modes, refer to the Instruction Manual.
*2
Monitored items can be changed. (Refer to the Instruction Manual.)
*3
For the details of the trace function, refer to the Instruction Manual.
*4
For the details of faults history, refer to the Instruction Manual.
*5
The USB memory mode will appear if a USB memory device is connected. Refer to the Instruction Manual for the USB memory mode.
*6
HAND/AUTO key only when using FR-DU08-01.
*7
Drawing features display of FR-DU08. LED displays of FR-DU08-01 for PU and EXT are different (HAND, AUTO), see previous page.
Operation mode switchover/frequency setting
*5
External operation mode
(At power-ON)
*1
PU operation mode
*1
PU JOG operation mode
*1
Value change
Frequency setting has been written
and completed!
Example
Flicker
Parameter setting mode (At power-ON)
*2
Output current monitor
*2
MonitorParameter settingFunctionFaults history
Parameter setting mode
Parameter clear
Display the present
setting
Value change Parameter write is completed!
All parameter clear Faults history clear Parameter copy
Group parameter setting Automatic parameter setting IPM parameter initialization Initial value change list
Function mode
Trace function
*3
(Example)
Flickering
(Example) (Example)
Flickering Flickering
Faults history 1
*4
Faults history 2
*4
Faults history 8
*4
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists, is displayed.
Long press
Output voltage monitor
*2
*6
*6
*6
*7
*7
*7
*7
*7
*7