Operating instructions

24 Faxing a Document or Photo
If you placed your document on the scanner
glass, you see this screen after the first page is
scanned.
If you need to fax additional pages, place your
original on the scanner glass or in the Automatic
Document Feeder. Press
Yes , then press OK to
continue. If you don’t need to fax another page,
press
No .
Note:
If the fax number is busy, you see a redialing message and the Artisan 800 Series
redials after one minute. To redial immediately, press Redial.
Other Ways to Dial a Fax Number
In addition to manual transmission, here are some other ways you can enter a fax
number:
■ If you’ve connected a telephone to the Artisan
800 Series, you can dial the fax number from the
phone. When you see the screen at right, select
Send .
Note:
Don’t hang up the phone until the Artisan 800 Series
begins transmitting the fax.
■
To select a speed dial or group dial entry, press Speed Dial or Group Dial .
Select the name of the speed dial entry you want to use.
■ To redial the last fax number you used, press Redial . The last fax number is
displayed on the screen.