User`s manual

1-2
2
Environmental Limits
1. Use ZM-62E at an ambient temperature of
0~50°C, and a relative humidity of 85 %RH.
2. Install a forced fan or an air conditioner to
maintain the ambient temperature when it is
higher than the above mentioned range.
3. Avoid places where moisture may easily con-
dense due to sudden temperature changes.
4. Avoid direct sunlight.
5. Never install ZM-62E in a place where impacts or
vibrations may be transmitted.
6. Avoid any place in which there is the possibility
that water, corrosive gas, flammable gas,
solvents, grinding fluids or cutting oil can come in
contact with the unit. Never install the unit in a
place where dust, salt and metallic particles are
present.
Locations
1. Secure sufficient space around ZM-62E for
ventilation.
2. Never attach ZM-62E to the top of any apparatus
generating high levels of heat (heater, trans-
former, large-capacity resistor, etc.).
20
30
40
50
10
0
POWER
RUN
Vent
Fan
POWER
RUN
POWER
RUN
POWER
RUN
POWER
RUN
YOUZAI
POWER
RUN
POWER
RUN
POWER
RUN
Notes on Usage
1 Notes on Usage