User`s manual

3-10
ZM-30 (ZM-61E)
Read/Write Area
ZM-
**
(ZM-62E)
Possible
[Main 1] tab window of [Comm. Parameter]
Check [Read/Write Area ZM-30 (ZM-61E) Compatible].
Switch/Lamp [Frame type: graphics] [Graphic Call] is automatically set on the screen for
creating/editing switch/lamp parts.
Model
Item
• Screen with only back-
ground color
• Screen with only back-
ground graphics
• Screen with both back-
ground color and
graphics
Background of
screen
--> Converted as unregistered screen
--> Converted as a screen with a graphic call
--> Converted as a screen with a background color and a
graphic call
Overlap • Normal
No items are registered
in a screen except an
overlap in DIV0.
• Other items except an
overlap are registered
in other DIV, or an
overlap is not registered
in DIV0.
--> An overlap is registered in the same number of a
multi-overlap edit as one of a screen in ZM-30
(ZM-61E) automatically.
--> An overlap is registered as a normal overlap in a
screen.
Switch [Switch Memory] of the
following [Function]:
[Normal]
[Block]
[+/- Block]
[Mode]
[Bit Operation] --> Converted to [Output Memory].
Relay mode • DIV0
• DIV1
• DIV2
• DIV3
--> Converted to [Relay Info. Output] as Write Area n+5.
--> Converted to [Relay Info. Output] as Write Area n+8.
--> Converted to [Relay Info. Output] as Write Area n+11.
--> Converted to [Relay Info. Output] as Write Area n+14.
Tenkey mode Entry mode
• The contents of [Command Memory] are the same as
that of ZM-30 (ZM-61E).
• Write Area n+2 is automatically specified for [Info.
Output Memory].
• Characters in a keypad
[0] to [9] and [.] are converted to the drawing characters
on a screen.
[0] to [9] and [.] are also stored in [Char. Entry] in the
[Switch] dialog in 1-byte character.
The characters within the switch are placed off the
screen so that they do not cover the drawing characters.
3 ZM-61E -> ZM-62E Conversion
Data converted as ZM-30 (ZM-61E) compatible data
There are notes on converting ZM-30 (ZM-61E) to ZM-42/43/52/72/82 in some functions that are possible in
ZM-71SE before adding ZM-62E to ZM-42/43/52/72/82 series line up.
Basically, these functions are automatically converted as ZM-30 (ZM-61E) compatible functions.