User`s manual

3-9
3 ZM-61E -> ZM-62E Conversion
ZM-61E ZM-71SE Ver. 1.3.0.0 or later
Model
Item
Character 1/
Character 2
Usage differs between
Character 1 display and
Character 2 display.
<Character 1 display>
• 1-byte characters and
2-byte characters are
distinguished.
• For 1-byte characters,
NULL code is process-
ed as indicated below.
• 2-byte characters are
displayed in JIS code.
Conversion is made in [Char. Display].
Compatibility to character display on ZM-61E is possible
by checking [JIS/ASCII] of the [Detail] tab window.
<Character 2 display: JIS/ASCII>
• Unlike ZM-61E, NULL code is processed as indicated
below.
• Compatible with JIS code
<Character 1 display: JIS/ASCII>
• In case of [ 1-byte]
Same display as ZM-61E
Same NULL code processing
• In case of [ 2-byte]
Display 2-byte characters in the same JIS code as
ZM-61E
A CD
BCD
A
D100 = H0041
D101 = H4443
H 41 00 43 44
H 41 00 43 44
Character-string following “00” is
not displayed.
H 00 42 43 44
H 00 42 43 44
D100 = H4200
D101 = H4443
Character-string following “00” is
not displayed.
Character entry
mode
Continuous entry of
characters is permitted
even after pressing the
[ENT] key.
Possible
By checking [Clear characters when cursor is on the
1st character in Entry Mode] in the [Environment Setting]
tab window of [Unit Setting]
Message representing
day of week is registered
in message edit
Calendar display Possible
Calendar is converted as [Calendar parts] and the mes-
sage in the message edit is automatically copied to and
registered in the [Week] tab window in the calendar parts.
Bar code reader [Read Data] to be enter-
ed in the memory ad-
dress set for [I/F
Memory] of [Bar Code
Setting] is “word units.”
Possible
By checking [Output the number of data read by a bar-
code reader by words] in the [Environment Setting] tab
window of [Unit Setting]
With check mark : Same display as ZM-61E.
Without check mark : To be output in byte units.