User`s manual

3-4
ZM-61E
Effective display
area
ZM-62E
Countermeasures
8.9" 8.9"
Panel cutout
dimensions
277 W x192 H mm 277 W x192 H mm
Display device
ZM-61E : EL
High-intensity EL
Resolution for
touch switches
20 (horizontal) x 10
(vertical) switches
(Matrix type)
40 (horizontal) x 20
(vertical) switches
(Matrix type)
External I/O
terminals
With RUN, STOP and
BZ terminals
RUN, STOP and BZ
terminals are not
available.
None
RS-422 terminal Available
None
Not available Use terminal converter ZM-1TC.
D-sub 15-pin con-
nector (For direct
connection to
Mitsubishi A/Q/FX
CPU)
Not available
Direct connection to
CPU is possible
using standard D-sub
25-pin connector
Screen data
transfer cable
Connected to D-sub
25-pin connector.
ZM-60C
Connected to modu-
lar jack. Accordingly,
the cable prepared
for ZM-61E cannot
be used.
Use screen data transfer cable
ZM-61E.
Model
Item
Barcode reader
connection
Connected to the
modular jack.
Use barcode reader cable
ZM-80BC.
Printer port Centronics 14-pin
connector Standard
printer cable for
PC-9801 is used.
Half-pitch 36-pin con-
nector Accordingly,
the printer cable pre-
pared for ZM-61E can
not be used.
Use printer cable ZM-80PC.
2
ZM-61E -> ZM-62E Conversion
CONSIDERATIONS ON HARDWARE
When you replace ZM-61E with ZM-62E, note the following points.
3 ZM-61E -> ZM-62E Conversion