User`s manual

3-1

3 Screen Editing of ZM-62E

Screen Editing of ZM-62E

ZM-62E is developed as a higher-level model that replaces ZM-61E.

Concerning the items to be taken into consideration when converting the ZM-

61E data to ZM-62E screen data, refer to “2 ZM-61E --> ZM-62E Conversion.”

The following describes the procedure for newly creating the screens using ZM-62E.

Setting Procedure

A new ZM-62E screen will be created according to the following procedure.

1. Start ZM-71SE (Ver.1.3.0.0 or later), and click the [New] icon, or select [New] from the [File] menu.

2. The [Edit Model] dialog is displayed.

Select [ZM-62E (640*400 8.9 model)], then click [OK].

3. The [Select PLC Type] dialog is displayed. Select a PLC model, then click [OK].

According to the selected PLC model, the [Comm. Parameter] dialog may be displayed. After checking the

setting, click [OK].