User`s manual

2-2
Main Menu
The "Main Menu" is the system menu for transferring the data between a personal computer and ZM-62E.
When the screen data is transferred from a personal computer to ZM-62E, the "Main Menu" or “Comm.
Parameter” (see page 2-10) must be displayed.
(If [Editor port] is selected for [Modular Jack 1] in the [Modular] of the editing software, it is not necessary to
display the "Main Menu.")
I/O Test
When the switch '1.' on the "Main Menu" is pressed, the following "I/O Test" is displayed.
This is the test menu to check only ZM-62E hardware.
Comm.Para.
I/O Test
MemoryCard
1.
2.
3.
System Program version
Model name of ZM-62E
Font data version
PLC I/F driver
version and name
PLC type and comment
specified by the panel editor
POWER
RUN
Main Menu
ZM-62EM 1998- 5 - 5 9: 0: 20
Editor:MJ1
SYS PROG.VER.1.430
FONT VER.1.210/1.100/1.000
JAPANESE 32
I/F DRV VER.1.200
SHARP JW series
PLC Type : SHARP JW series
Comment :
• Because of the matrix switch system, the screen
adds the letter M at the end of "ZM-62E".
POWER
RUN
A
I/O Test
Serial Test
Main Menu
Switch Check
Printer Chcek
B
C
D
2 Operation of Main Menu