User`s manual

1-31

to Printer

Half pitch 36 pins

Centronics

CN2

MJ2 MJ1

CN1

ZM-62E

100-

240VAC

RUN / STOP

Printer Interface (CN2)

When a printer is connected to ZM-62E via the connector (CN2), it is possible to hard-copy the screen

display of ZM-62E, the data sheet, or the sampling data.

To connect a printer to ZM-62E, use the parallel interface cable of 36 pins which is optional equipment.

(ZM-80PC: 2.5m)

* The printer cable for ZM-61E/ZM-70 cannot be used.

Note of Usage of SRAM Memory Card (via ZM-1REC);

In case of connecting a printer to ZM-62E with a “Memory Card on the market compliant (SRAM)” at all times,

be sure to turn off a printer at the same time when turning off ZM-62E. If a printer is not turned off when ZM-

62E is turned off, the voltage will circulate from the power supply line of a printer to make the power consump-

tion of SRAM cassette’s backup battery increase, and finally, the backup battery will consume drastically

within a few months.

Compatible Printer Control Code System and Printer Models

NEC PC-PR201 series

EPSON Compatibles with ESC/P24-84 or later

HP(HEWLETT PACKARD) PCL Level 3

1 Printer Interface (CN2)