User`s manual

1-13
Item
Switch Resolution
Form
Life of Touch Panel
Surface treatment
Specifications
40 (W) X 20 (H)
Matrix resistance film form
Use of one million times or more
Hard coating, anti-glare treatment 5%
Item
Serial Interface
for connecting PLC
(D-sub 25 pins, female)
Serial Interface 1 and 2 for
transferring data/barcode
/ZM-1REC
(modular jack, 8 pins)
Printer Interface
Specifications
RS-232C, RS-422/485
Asynchronous type
Data length: 7, 8 bits
Parity: even, odd, none
Stop bit: 1, 2 bits
Baud rate: 4800, 9600, 19200, 38400, 57600bps
RS-232C, RS-422/485 (2-wire connection)
*When ZM-1REC, an optional equipment, is connected:
1 slot
SRAM: Max. 4 MB FROM: Max. 16 MB
Comply with JEIDA Ver. 4.0 (The limit exists.)
Complies with centronics, half pitch 36 pins (for PC98x1)
NEC : PR201
EPSON : compatibles with ESC/P24-84 or later
CBM292/293 printer (The screen copy cannot be printed out.)
Item
Drawing Method
Drawing Tool
Specifications
Exclusive drawing software
Name of exclusive drawing software : ZM-71SE Ver. 1.3.0.0 or later
Personal computer : Pentium ll 450MHz or more is recommended
OS : Microsoft Windows 98/NT version 4.0/Me/2000/XP
Capacity of hard disk required : free area of approx. 460MB or more
(For minimum installation : Approx. 105MB)
Display : Resolution of 800 X 600 or more is recommended
Touch Panel Specifications
Interface Specifications
Drawing Environment
1 Specifications