Instruction manual

SUBJECT PAGE NO.
Machine Requirements……………………………………………………………………………….. 2
Installation and Set-Up……………………………………………………………………………….. 3
Electrical Installation…………………………………………………………………………………. 5
Safety Instructions……………………………………………………………………………………. 6
How to Operate the Machine………………………………………………………………………….. 6
Air Pneumatics……………………………………………………………………………………….. 10
Preventive Maintenance……………………………………………………………………………….. 13
Repair and Service…………………………………………………………………………………… 13
Spindle and Pivot Shaft Diagrams…………………………………………………………………........ 14,15
400S Base Exploded View……………………………………………………………………………. 16,17
Machine Requirements:
MODEL NO:_________________ SERIAL NO:_________________
16” Blade - 90° Cutting Capacities A500, A500M 16” Blade - 45° Cutting Capacities A500. A500M
20” Blade - 90° Cutting Capacities A500, A500M 20” Blade - 45° Cutting Capacities A500, A500M
Height
Height
16” Blade
16” Blade
20” Blade
20” Blade
Width
Width
Pneumatic Requirements: (if applicable) 2 CFM per 10 strokes at 75 PSI (.086 cubic meters at 5.4 kg/cm2)
Dust Collection Requirements: 1100 CFM at 4” outlets
Electrical Requirements: Based on one motor per machine
Motor Size Required Amperage Breaker Needed
7-1/2 H.P. 3 Phase, 230 Volt 20 amps 30 amp
7-1/2 H.P. 3 Phase, 460 Volt 10 amps 20 amp
10 H.P. 3 Phase, 230 Volt 26 amps 40 amp
10 H.P. 3 Phase, 460 Volt 13 amps 20 amp
Cutting Tool Requirements: Heavy, rigid plate blades.
16” blades: .120 to .130 plate 20” blades: .150 to .160 plate
-2-
400S Blade Guard exploded view................………………………………………………………… 18,19
Parts List……………………………………………………………………………………………… 20