Instruction manual

Table Of Contents

Preparing the camera

When you turn the camera on for the first time, the date/time setup screen

appears.

Setting up the date

1 Set the power switch to ON to turn

the camera on.

• To turn the camera off, set it to OFF.

2 Verify that [OK] is selected on the

LCD monitor, then press the

center of the controller.

3 Select each item with b/B and

set the numeric value with v/V.

• When changing the sequence of

[YYYY/MM/DD], first select [YYYY/

MM/DD] with b/B, then change it

with v/V.

4 Repeat step 3 to set other items, then press the center of the

controller.