Instruction manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Setting ISO
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Capturing smiling faces (Smile Shutter)
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
Printing images
155
To cancel the print
During printing, pressing the center of the controller cancels the print.
Remove the USB cable or turn off the camera. When you want to print
again, follow the procedure (Stages 1 and 2) above.
4 Turn on your camera and the printer.
The screen used for selecting images you want to print appears.
Stage 2: Printing
1 Select the image to print with b/B on the controller, then press
the center of the controller.
• To cancel, press the center again.
2 Select [OK] in the menu, then press the center of the controller.
The image is printed.
• After the screen indicating that the print is completed appears, press the
center of the controller.
3 Repeat steps 1 and 2 if you want to print other images.