Instruction manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Setting ISO
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Capturing smiling faces (Smile Shutter)
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
154
Printing images by connecting the
camera to a PictBridge compliant printer
Note
• You cannot print RAW images.
Note
• It is recommended to use the AC Adaptor (sold separately) to prevent the power
from turning off partway through printing.
Even if you do not have a computer, you
can print images shot using your camera
by connecting the camera directly to a
PictBridge compliant printer.
“PictBridge” is based on the CIPA
standard. (CIPA: Camera & Imaging
Products Association)
Stage 1: Connecting the camera to the printer
1 MENU button t 2 t [USB connection] t [PTP]
2 Turn the camera off and select the type of memory card you
want to print images from using the memory card switch.
3 Connect the camera to the printer.
2 To the
USB terminal
USB cable
1 To the
USB terminal