Instruction manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Setting ISO
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Capturing smiling faces (Smile Shutter)
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
140
Viewing images on a computer
Using your computer
This section describes how to copy images in a memory card to a computer
connected using a USB cable.
The following environment is recommended for a computer connected to
the camera to import images.
x Windows
OS (pre-installed): Microsoft Windows XP*
1
SP3/Windows Vista*
2
SP2
• Operation is not assured in an environment based on an upgrade of the
operating systems described above or in a multi-boot environment.
*1 64-bit editions and Starter (Edition) are not supported.
*2 Starter (Edition) is not supported.
USB jack: Provided as standard
x Macintosh
OS (pre-installed): Mac OS X v10.3/Mac OS X v10.4/Mac OS X v10.5
USB jack: Provided as standard
Notes on connecting your camera to a computer
• Operations are not guaranteed for all the recommended computer environments
mentioned above.
• If you connect two or more USB devices to a single computer at the same time, some
devices, including your camera, may not operate, depending on the types of USB
devices you are using.
• Operations are not guaranteed when using a USB hub or an extension cable.
• Connecting your camera using a USB interface that is compatible with Hi-Speed
USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this
camera is compatible with Hi-Speed USB (USB 2.0 compliant).
• When your computer resumes from a suspend or sleep mode, communication
between your camera and your computer may not recover at the same time.
Recommended computer environment