User manual

Mobile Computer MC 95xx
ex
-NI
Type B7-A29.-…………
Operation
Technical data subject to change without notice.
Issue: Revision 1 / March 2011
Page 19 of 57
4. Operation
Before assembling the device, make sure you have all the components and documents.
Scope: 1 x MC 95xx
ex
-NI
1 x Lithium-ion battery
1 x Strap assembly
1 x Protective overlay on the display window
1 x Stylus
1 x User manual
1 x Special tool for battery release (only for ATEX zone 2 and zone 22)
Caution!
The safety and accident prevention regulations relevant to the respective application
must be adhered to. The units must be completely assembled before they may be
operated.
4.1 Getting started
Carry out the following steps before first use of the MC 95xx
ex
-NI:
1. Install a micro SD card (optional).
2. Install the SIM card (only MC 9596
ex
-NI).
3. Insert the battery.
4. Charge the MC 95xx
ex
-NI.
4.2 Recommended position for the MC 95xx
ex
-NI
 The recommended position for the mobile computer when not in use.
 In this position the device cannot be protected against damage.
 The display can be damaged by objects lying on the supporting surface.