User manual

Mobile Computer MC 95xx
ex
-NI
Type B7-A29.-…………
Safety Instructions
Technical data subject to change without notice.
Issue: Revision 1 / March 2011
Page 13 of 57
3.4 Health and Safety Recommendations
Caution!
Use only the accessories, batteries and battery chargers approved by BARTEC. Do not
attempt to charge damp/wet MC 95xx
ex
-NI or batteries. All components must be dry
before they are connected to an external power supply.
3.4.1 Ergonomic Recommendations
Caution!
The following recommendations should be observed to avoid or minimise potential
health problems at the workplace. Contact your health and safety officer on site to
ensure that you are familiar with your company’s safety regulations, which serve to
protect employees in the workplace.
− Avoid unilateral repetitive movements.
− Posture should be as neutral as possible.
− Avoid using excessive force.
− Keep objects that are used frequently within easy functional reach.
− Perform tasks at heights that suit the person and the type of work
− Place the objects in positions that will eliminate vibrations
− Avoid exerting direct pressure
− Provide adjustable tables and chairs.
− Ensure sufficient clearance for easy movement
− Provide a suitable working environment
− Optimise work procedures
− Alternate hands as often as possible when doing repetitive tasks.
3.4.2 Installation in Vehicles
RF signals can have a negative impact on electronic systems in vehicles (including safety
systems) if they have not been installed correctly or shielded adequately. If you have any
questions about your vehicle, please get in touch with the manufacturer or with a sales
representative. You can find out from the manufacturer if any additional equipment has
been installed in the vehicle. An airbag inflates with great force. DO NOT PLACE ANY
objects, such as mounted or mobile wireless equipment in the area above the airbag or in
the airbag deployment area. If the wireless equipment in the vehicle was not installed
properly, serious injuries can occur when the airbag is deployed. Position the device
within reach. Make sure you have access to the device without having to take your eyes
off the road.
Note
Connection to an alert device that will cause a horn to sound or a light to flash on
receipt of an incoming call on public roads is not permissible.