Specifications

If you still cannot turn off the system with the power switch.

slide

the reset

switch on the bottom of your computer to turn off the

systemtrefer

to page

2-J).

Five seconds later, turn on the computer by sliding the power switch.

Question: Why doesn’t the glide pad function correctly?

Confirm the surface of the glide pad is completely dry and free from dirt and

grease.

Confirm the item

Inter&

Poinring

DeGce in the

Advanced

menu of the Setup

Utility is enabled.

Trouble with Peripherals

Question: Why don’t expansion or peripheral devices function?

Confirm they are correctly connected to your computer or the external floppy

disk drive.

Confirm the external floppy disk drive is connected correctly to the computer if

peripheral devices are connected to the external floppy disk drive.

Confirm drivers necessary for operating ports on the devices are installed.

There may not be a free IRQ (Interrupt). Free up an IRQ from a built-in device.

Question: Why can’t I print?

Make sure the printer is turned on.

Check whether the external floppy disk drive and the printer are connected

correctly.

Check whether the printer has enough paper.

Check whether the printer driver is installed.

Make sure

LPT Port

in the

Advanced

menu of the Setup Utility is set correctly.

From the

Start

menu, select

Settings

Printers

to confirm your printer is

installed here. If not, click

Add Printer

to install your printer.