Specifications

Trouble with Hard Disk
Question: Why can’t I read or write data to/from the hard disk?
Confirm the drive and file names are correct.
Confirm the hard disk has sufficient free space.
The hard disk in your computer is formatted with FAT32. You cannot read or
write data formatted in other operating systems, which are not FAT 32
compatible. Applications that are not compliant with FAT32 may not work
properly.
If you cannot re-install Windows 98 correctly, check whether the item Firetl
disk hoot sector: in the Searriry menu of the Setup Utility is Nonncll.
Trouble with Floppy Disks
Question: Why can’t I use a floppy disk?
Confirm the external floppy disk drive unit is correctly connected.
Confirm the floppy disk is inserted correctly.
The floppy d&k may not be formatted or could be corrupted.
If you cannot write to a floppy disk. the disk may be write-protected. Eject the
disk and ensure that the write-protect tab covers the detection hole.
If you cannot write to a floppy disk, the disk may be full. Use another disk.
Confirm the item Diskette A: is 1.44MB, 3 ‘/r in the Main menu of the Setup
Utility.
Check whether the supervisor has set a password prohibiting access to the
floppy disk drive in the Securir.v menu of the Setup Utility.
Question: Why doesn’t the keyboard or the glide pad function?
l Perform a software reset by pressing Ctrl+Alt+Delete.
l If you cannot perform a soliwarc reset, press the power switch for more than six
seconds to turn off the system. Five seconds later. turn the computer on.
/
T-4
Trnllhleshnntina