Specifications

Trouble when Starting
Question: Why doesn’t the power switch function?
l Make sure the AC power cable is correctly connected to a live wall outlet.
l If the computer is operating with batteries, batteries may be discharged. Connect
the computer to a wall outlet.
Question: Why doesn’t Windows start?
Check whether the external floppy disk drive unit contains a non-system disk.
Remove the floppy disk from the drive, and press any key.
If you are attempting to boot from the external floppy disk drive, check to make
sure the disk is fully inserted and seated into the drive.
If you attempt to boot from the external floppy disk drive, check whether the
Diskprte Drive is set to the first in Boor Sequence in the Main menu of the Setup
Utility.
Question: Why do I get a non-system disk or disk error message?
You may have inserted a non-bootable disk in the external floppy disk drive unit
(either a defective disk or one without an installed operating system). Remove
the disk.
If this message is issued when you attempt to boot from your hard disk drive,
insert a bootable disk into the external floppy disk drive unit and check the status
of your hard disk drive.
Check whether the items Diskette A: and Hard Disk cvpe: are correctly set in
the Main menu of the Setup Utility.
Question: Why do I get the message Operating system not found?
0
If you get this message when starting from the hard disk. insert the boot up disk
into the external floppy disk drive unit; then check the condition of the hard
disk.
0
Enter the Setup Utility and check the status of the hard disk . Check the size of
the hard disk and make sure the item Hard Disk Type of M& menu is set to
/\MO.
T-2 Troubleshooting