Specifications

Power m&u
Ia
See Chapter 3 about power management and the hattev.
Power Switch Function Defines the function of the power switch. If you select
On/Off, the switch works only to turn on/off the computer. If you select
SuspencUResume, the system enters the mode that is specified in the item Suspend
Mode when you press the power switch. To resume the system, press the power
switch again.
Cover Close Specifies the mode the system enters when the screen cover is closed.
Power Management Function Enables or disables the items below: Hard Disk
Pob+.er Down after, Video Power Down after. and Auto Suspend.
Hard Disk Power Down after Defines the duration of non-access to the hard disk
after which the power supply for the hard disk stops automatically.
.
Video Power Down after Defines the duration of non-access to the screen after
which the power supply for the screen stops automatically.
Suspend Mode Defines which mode the system enters when the system is
suspended.
Auto Suspend Defines whether the system enters a suspend mode when you do not
operate the computer for the specifted length of time. This item does not function
under Windows 98.
Critical Battery Suspend Defines whether the system enters the suspend-to-disk
mode when the battery power becomes low.
Auto Backlight Control Enables or disables the self-adjustment of the display
backlight. When this item is enabled. for example, backlight brightness is reduced
when the system operates on battery power.
Resume On Modem Ring Defines whether the system resumes from the suspend-
to-RAM mode when the modem receives a call.