Specifications

CHAPTER 5
Communication Functions
This chapter explains how to use infrared communications and the built-in modem.
Infrared Communication
Using the IR (infrared) port located on the right side of your computer, you can
communicate wirelessly with infrared-equipped devices such as electronic
organizers, computers or printers. To establish infrared communication, follow the
instructions below. See the manual or online help of each application for details.
Positioning and Preparing the Computer and the Target Device
I. Put your computer on a flat surface.
2. Place the target device so that its IR port is in line with that of your computer.
3. Adjust the distance between the IR ports to be less than 20 inches (50 cm).
When using a Sharp electronic organizer, make sure the two IR ports
are within 12 inches (30.5cm).
Setting for Infrared Communication
I.
In the Advanced menu of the Setup Utility, make sure the Motfe of IR Port is
It-DA.
2.
In the Power menu of the Setup Utility and the Power Management Properties
dialog box, disable power management. Refer to Disablirzg Po,c-er
Management in Chapter 3.
3. In the Infrared Monitor dialog box in the Control Panel. select 0prions ancl
enable infrared communication.
5-1