Specifications

Printer
You can connect a printer to a parallel port of the external floppy disk drive unit.
m
Before using u printer, read the printer manual.
Setting the Setup Utility
I
In the Advanced menu of the Setup Utility, set the LPT Port: to Auto or Enabled.
Also set the Mode:. referring to your printer manual.
Installing a Printer Driver
To use a printer, you need to install a printer driver.
From the Start menu. select Settings - Printers.
I.
2.
3.
4.
5.
6.
7.
8.
.
Double-click Add Printer. The Add Printer Wizard appears.
Click Next.
Confirm Local printer is selected and click Next.
Select the manufacturer and the printer, and click Next. If you cannot find the
model name of your printer, you have to install the printer driver included
..with your printer. See your printer manual for details.
Select LPTl and click Next.
Make sure the printer name is correct, and click Ne.rt.
Decide whether to print a test page, and click Finish. Before printing a test
page, make sure the printer is ready.
RS-232C Device
You can use RS-232C devices. such as a modem or a terminal adapter with your
computer. RS-23X port is available on the external floppy disk drive unit. To use
an RS-232C device. set the item Serirll Port: to Auto or Enabled in the i\~lr~~rzc~~f
menu of the Setup Utility. -.See each manual before using the device.