Specifications

Setting in the Setup Utility
In the Power menu, set Power Management Function to Enabled and set Vitleo
Power Down after to an appropriate value.
Suspend Modes
The power management contains two types of suspend modes: suspend-to-RAM
mode and suspend-to-disk mode. In the Setup Utility, you can define which suspend
mode the system enters in what conditions.
Suspend-to-RAM mode stores the current condition of the computer in RAM
and stops power supply to all but a few essential components. Your system enters
and resumes from the suspend-to-RAM mode per the conditions mentioned
below. In the suspend-to-RAM mode, the Power indicator blinks green.
Suspend-to-disk mode saves the current condition of the computer in an area of
the hard disk, which is called “suspend-to-disk partition,” and turns off the
computer. Your system enters and resumes from the suspend-to-disk mode per
the conditions mentioned below. In the suspend-to-disk mode, the Power
indicator turns off.
Before suspending the system
Finish communications, printing, and playing music or video.
Entering the Suspend modes
Your computer enters a suspend mode in each of the following cases. You can
select the suspend mode that the system will enter in &spend Mode in the f-‘ower
menu of the Setup Utility.
You press the power switch when the item Power Switch Function is set to
Suspend/Resume in the Setup Utility.
You press Fn+F12.
The specified time in S_vsrem Standby of Power Management Properties dialog
box has passed without any operation.
You select Standby in the Shut Down Windowr dialog box.
n-a