Specifications

to exert a lot of pressure on the pad. The glide pad will respond to a light touch
from your fingertip.
Click, Double-click, and Right-click
To click or double-click, you can use the left button just like that of a mouse.
Instead of clicking by pressing the left button, you can just tap gently anywhere on
the rectangular pad. For right-clicking, you can use the right button.
Drag and Drop
You can move icons or windows by using “drag and drop” below:
I
1.
Position the pointer over the object.
2.
Press the left button; do not release it.
3.
Holding down the button, move the pointer. The object moves together with
the pointer.
4. Release the button when the object reaches its destination.
Scroll
You can scroll through information in a list or in a document by using the glide
pad. Place your finger on the right part of the glide pad and move it back and forth.
This procedure works only vertically, and in the limited applications.
Changing the Configuration
In the Mouse Properties dialog box, you can change the configuration of the glide
pad, such as swapping left and right buttons, changing the pointer size, etc.
l
.
If you swap the left and right buttons,
“tapping” on the glide pad as an
alternative rnethod of pressing the left button u~iiill no longer fkrction.
If you prefer to use a ntouse and turn off the glide pad. _WU C’LIII
disable the glide pad in the Setup Utility. See also Chapter 4.
2-5