Specifications

85
<Ver. 2.1>
Caution
Mount the fixture after checking the strength of the wall and beams.
2. Mount the assembled metal fixture to the wall.
Mount the assembled metal fixture to the wall, using screws or bolts, attaching at a minimum of four points
(shown below as b). The choice of screws or bolts here should be made based on the specific composition and
strength of the wall.
b
b
b
b
Make the end of the
nut 4 flush with the
screw.
4
4
4
860
590
49.8
104
104
49.8
48.8
250
250
660
101.5
Caution: Mount one of the four groups bs to the wall at four points
Mounting standard metal fixtures (PDK-4006)
4) Mounting the monitor fixing bolt to the plasma display
1. Mount the monitor fixing bolt at four points on the rear of the plasma display.
14-M8 (with φ 16 hole rivet)
4