Specifications

<Ver. 2.1>

* Using our multi-installation fixture (PDM-4001) eliminates the need to set the temperature after

installation.

For the installation conditions for the multi-installation fixture (PDM-4001), see the next page.

Special installation (Installation under the floor)

10 mm

<Reference> After installation, measure the temperatures in the area shown in the figure below to make sure

that the values are within the specified range.

Exhaust side

(temperature of the

exhaust from FAN)

Room temperate

+ 15 °C or less

Intake side

Room temperature

+ 5 °C or less