Specifications

129
<Ver. 2.1>
H HPS H POSITION × ‡‡Adjusts horizontal phase.
HMD HOUR METER DISP.
×××Displays hour meter.
I IN1 INPUT1 ‡ ××Selects VIDEO input.
IN2 INPUT2
‡ ××Selects Y/C input.
IN3 INPUT3
‡ ××Selects RGB 1 input (BNC terminal).
IN4 INPUT4
‡ ××Selects RGB 2 input (miniD-SUB terminal).
K KLN KEY LOCK NO ××× Enables input to the operation panel or remote control.
KLY KEY LOCK YES ××× Disables input to the operation panel or remote control.
M MKB MASK BLACK ××× Sets top and bottom mask sections to black
when PC-9800
®
is input.
MKG MASK GRAY ××× Sets top and bottom mask sections to gray
when PC-9800
®
is input.
MPY MP MODE YES ×××Turns ON MP (Motion Picture) mode.
MPN MP MODE NO
×××Turns OFF MP (Motion Picture) mode.
NNMB
NTSC MASK BLACK ×××Sets top and bottom mask sections to
black when NTSC is input.
NMG
NTSC MASK GRAY ×××Sets top and bottom mask sections to
gray when NTSC is input.
NMN
NTSC MASK ON ×××Turns OFF top and bottom mask sections
when NTSC is input.
P POF POWER OFF
‡ ××Turns off power.
PON POWER ON
‡ ××Turns on power.
R RHI RED HIGH × ‡‡Adjusts RED HIGH-LIGHT.
RLW RED LOW
× ‡‡Adjusts RED LOW-LIGHT.
S STD STD. W/B DATA
×××Restores white-balance adjustment
data to factory-preset values.
STP STD. POSI. DATA
××× Returns phase adjustment data to factory-
preset values. (Valid only for RGB1&2 input)
SHP SHARPNESS × ‡‡ Adjusts SHARPNESS (except for RGB 1 & 2 input).
T TNT TINT × ‡‡ Adjusts TINT (except for RGB 1 & 2 inputs,
and PAL signal for the PDP-V401E).
U UP0 UP 10 × — — Makes the adjustment value 10UP.
UPn UP n
× — — Makes the adjustment value nUP.
UPF UP FULL
× — — Maximizes the adjustment value.
V VPS V POSITION × ‡‡ Adjusts vertical phase (valid only for RGB 1
& 2 input).
Command
name
Name
Validity in
normal
mode
Validity of
number-
direct
command
Function
Validity of
UP/
DOWN
command
Outer control by RS232C