Specifications

4
Universal Serial Bus
Your notebook has a new interface called Universal Serial Bus (USB). This
interface unifies the connection between computers and peripheral devices such as
keyboards, mice, speakers, modems, and printers. Through the USB, you could
connect/disconnect the peripherals without turning off the notebook. See manuals
of peripheral devices supporting USB.
Connecting a USB-supporting peripheral device
1. Turn on or restart the notebook.
2. When the message Press <F2> to enter SETUP appears, press F2.
3. In the Advanced menu, enable USB Device.
4. Press Esc; then, Enter twice.
5. After the system starts, open the connector compartment cover at the rear of
the notebook.
6. Connect the USB cable from the peripheral to the USB port.
USB Port
Figure 4-7. Connecting a USB device
As of April 1997, no USB devices are available. It is not guaranteed that
all USB devices in future will operate correctly.
4-8 Peripherals