Specifications

3
Setting Power Configuration
You can configure power management settings in the Power menu of the Setup
Utility.
Figure 3-1. Setup Utility Power Configuration Screen
Power Management Enables or disables power management.
Hard Disk Power Down After Specifies a period of inactivity after which the
system does not supply power to the hard disk drive. If the period of Standby After
below is shorter than that of Hard Disk Power Down After, the value of the latter is
not effective because the standby mode includes stopping the power supply to the
hard disk.
Idle Mode Enables/disables the idle mode.
Standby After Specifies the period after which the system enters the standby mode.
Auto Suspend-to-RAM After Specifies the period after which the system enters
the suspend-to-RAM mode.
Auto Suspend-to-disk After Specifies the period after which the system enters the
Suspend to Disk.
3-8 Battery and Power Management