Specifications

Question: Why does the power switch not function?
•
Make sure the AC power cable is correctly connected to a live wall
outlet.
•
The power switch does not accept just a light touch. Press the
switch firmly.
•
If the notebook is operating with a battery, the battery may be
discharged. Connect the notebook to a wall outlet.
Question: Why does Windows not start?
•
Check whether the floppy disk drive contains a disk without the
operating system. Remove the floppy disk from the drive, and press
any key.
•
When the message “Starting Windows 95 ...” appears, press F8 to
open the Windows 95 Startup Menu. The menu provides different
ways to start the system. See also Introducing Microsoft Windows
95 and Windows Help.
•
Use a diagnostics software available commercially to check the
notebook. If you need to re-initialize your hard disk, refer to the
Re-installation Instructions. It is strongly recommended to backup
your data before you proceed the
re-installation.
Question: Why is the screen blank?
•
Press the Spacebar to see if any power management feature has
blanked the screen to save power.
•
See the AC power indicator to check whether the notebook is
powered.
•
If you are using a battery pack, make sure it is installed correctly
and has a charge remaining.
Troubleshooting T-3
Troubleshooting
•
Make sure the LCD screen is selected as the display by pressing
Fn+F5.
•
Check the brightness controls for your display by pressing Fn+F6
or Fn+F7.
•
Check whether the back light is on by pressing Fn+F11.
•
Turn the notebook off, wait more than ten seconds, and turn the
notebook back on.
Question: Why does the keyboard or the GlidePoint not function?
•
Execute the software reset by pressing Ctrl+Alt+Delete.