Specifications

8
Running the Setup Utility
With the Setup Utility, you can customize the system configuration information,
such as time and date, port assignments, passwords, or power management settings.
The information you have specified is saved in a special area called CMOS RAM,
and the system reads it every time you turn on the notebook.
Contents of the Setup Utility
The Setup Utility consists of five menu pages, as follows:
•
Main: Basic system configuration
(time/date, disk drive and memory settings)
•
Advanced: Device interface configuration (I/O ports, sound settings)
•
Security: Password settings
•
Power: Power management (battery saving settings)
•
Exit: Exit the Setup Utility
Entering and Exiting the Setup Utility
1. Turn on the notebook.
2. When Press <F2> to enter SETUP appears, press F2 to display the Setup
Utility screen.
3. Change the desired settings.
4. Press Esc to select the Exit menu.
5. Select one of the following exit method, and press Enter.
• Save Changes & Exit
• Discard Changes & Exit
• Get Default Values
• Load Previous Values
• Save Changes
Setup Utility 8-1