Instruction manual

5・29
Chapter 5 Menu Operation (Instruction)
5-3 Instruction (Program)
If you click [Instruction] at the menu bar of the [Program] window, [Instruction] menu summary will
be displayed.
・Program：Ladder
・Program：Mnemonic
Refer to “Chapter 6 Program Edit” for the detail on the instruction input.
Content
When editing the ladder, Input A contract.
When editing the ladder, Input B contract.
When editing the ladder, Input horizontal line.
When editing the ladder, Input vertical line.
When editing the mnemonic, input STR, STR NOT, AND STR, OR STR
instruction.
When editing the mnemonic, input STR NOT, AND NOT, OR NOT
instruction.
When editing the mnemonic, input AND, AND NOT, AND STR instruction.
When editing the mnemonic, input OR, OR NOT, OR STR instruction.
Input OUT instruction (coil).
Input TMR instruction.
When editing the mnemonic, it's also used as the input of TMR contact.
Input CNT instruction.
When editing mnemonic, it's also used as the input of CNT contact.
Input the application instruction.
Input F-43 instruction (reverse bit).
Input F-44 instruction (differential ON).
Input F-45 instruction (differential OFF).
Input F-20 instruction (MD).
・If you click［F-20 (MD)］, ［Input F-20 (Maintenance display)］dialog
box will be displayed.
Menu item
A contact
B contact
Horizontal line
Vertical line
STR
NOT
AND
OR
OUT
TMR
CNT
FUN
F43
F44
F45
F-20 (MD)