Instruction manual

5・19
Chapter 5 Menu Operation (Edit)
■■
■■
■ Create Line Comment (Program)
Make the assigned line to the line comment.
・An input box is displayed in the row, so that you can write in the comment.
・The character number of the line comment is 100 characters.
・A Row that become the line comment becomes NOP instruction inside the PC.
・Rows during the network can not become line comments.
・ In the ladder, you can insert the line comment in the row where the ladder circuit exists, but in the
mnemonic, you can only create the line comment in the program address of the NOP instruction.
Ladder program
Mnemonic program
After selecting the row number
with the cursor, click [Edit]-
[Create Line Comment]. Then,
the line comment will be
inserted. After inputting the
comment character, establish
the command with the [Enter]
key.
← Inside the PC, it becomes the NOP instruction.
← Inside the PC, it becomes the NOP instruction.
← Inside the PC, it becomes the NOP instruction.
(Example)