Instruction manual

4・16
Chapter 4 Let's Create Program
4-3 PC Transfer
//
//
/Monitor
Transfer the created ladder program to PC (JW-33CUH1), and execute the monitoring of data.
1. Click [Setup]-[Communication Setup] of the menu bar.
2. [Communication Setup] dialog box will be displayed, and select [PC itself]. Match the port
number of [COM.Port] to the port number of the personal computer.
3. If you click [Setup in Detail] button, [Setup COM Baud Rate] dialog box will be displayed.
4. Select “high speed (115.2kbps)”. After clicking [OK] button, click [OK] button at
[Communication Setup] dialog box, and the setup communication will be completed.
5. When the PC is running, stop the PC. Click [PC]-[Start/Stop] of the menu bar, and the following
dialog box will be displayed.
6. Click [OK] button. Verify that it has been stopped at the RUN lamp of the PC.
Click here