Instruction manual

4・11
Chapter 4 Let's Create Program
32. If you click [OK] button, [Timer/counter instruction] dialog box will be displayed.
33. After clicking [ ] , select [09000] and input [1] [0] [0]. Then you can assign the register
09100.
34. If you click [OK] button, F-63 (INC) instruction will be input.
35. After moving the cell cursor to the next line, (the next position is optional), if you click
button, [Select Application Instruction] dialog box will be displayed. Here we input F-40 (END)
instruction by the method of selecting the instruction. First, double click [Execution condition
instruction] at the general classification chart.
Double click here
F-40 (END) instruction is automatically written to the final address (“76777”, in case of JW-
33CUH1) of the program memory. Therefore, the calculation is executed even without writing it in,
but if you write in F-40 (END) instruction right after a program has been created, the calculation
time will be short.
Reference