Instruction manual

4・6
Chapter 4 Let's Create Program
6. When inputting B contact, click of the toolbar for ediing ladder. The following [B contact]
7. After inputting the relay number([2] in case of “00002”), click [OK] button. B contact will be
displayed and the cell cursor will move to the right cell.
8. To input TMR contact (A contact), first click of the toolbar for ediing ladder. [A contact]
dialog box will be displayed, and press inside the box.
9. After clicking [T0000], input TMR number ([1] in case of “0001”), and click [OK] button. TMR
contact (A contact) will be displayed, and the cell cursor will move to the right cell.
10. To input coil (OUT instruction), click of the toolbar for ediing ladder. The following
[OUT] dialog box will be displayed.
dialog box will be displayed.