Instruction manual

3・26
Chapter 3 Basic Operation (Function Summary)
■ PC
Function
Write program, a variety of data to the PC.
Read program, a variety of data to the PC.
Verify with the program and the variety of data of the PC.
Run/stop the PC.
Execute I/O search of the PC.
Register/change the password of the PC.
Delete the password of the PC.
Execute ON of the secret function of the PC.
Initialize the memory of the PC.
Execute the parity check of the PC.
Read from the EEPROM/flash ROM of the PC.
Write to the EEPROM/flash ROM of thePC.
Register I/O table of the PC automatically.
Read I/O table of the PC.
Monitor the error condition of the PC.
Monitor the scan time of the PC.
Monitor the internal clock of the PC.
Connect to the communication module of the PC through the
modem.
Disconnect the modem communication with the
communication module of the PC.
Command
PC Transfer [Write]
PC Transfer [Read]
PC Transfer [Verify]
Start/Stop
PC Operation [I/O Search]
PC Operation
[Secret]
PC Operation [CU Memory Clear]
PC Operation [Parity Check]
PC Operation [Read from EEPROM]
PC Operation [Write to EEPROM]
Create I/O Table
PC Operation [Read I/O Table]
PC Monitor [Error Monitor]
PC Monitor [Scan Time Monitor]
PC Monitor [Clock Monitor]
Modem Connection
[Connect]
Modem Connection
[Disconnect]
Delete Password
Secret : ON
Register/Change
Password
■ Tools
Function
Opens the [Read from Library] window.
・You can read a library.
Opens the [Register Library] window.
・You can register the library.
Opens the [Mltipoints Monitor] window.
・You can monitor any data in data memory or system memory.
Opens the [Sampling Trace] window.
・You can see the ON/OFF information of the programmable controller's
relay or the registry information in the form of time chart.
Opens the [Option Parameter] window.
・You can define the parameter settings of the model to save parameters in
the option module.
Converts the ladder graphical information you are editing to an intermediate
language (ASCII code) corresponding to information exchange format.
・You can send the data through the communication port or can read/write
the data into external media.
Command
Library [Read]
Library [Register]
Multi Points Monitor
Sampling Trace
Option Parameter
CAD I/F