Instruction manual

3・23
Chapter 3 Basic Operation (Function Summary)
■ Edit
Function
It brings back the previous state of the operation.
Cut the selected area and saves it for the moment.
Save the selected area and saves it for the moment.
Paste the data that was cut or copied onto the position of the cursor.
Temporarily keep in the clipboard the selected area you are editing in the
program ladder window as an image data.
Find mnemonic, address (relay, register etc..),character line (symbol,
comment etc..) from the active window.
In the selected active window, search mnemonic, address, character line
(that are assigned in the search character summary) from the cursor
position to the backward direction.
In the selected active window, search mnemonic, address, character line
(that are assigned in the search character summary) from the cursor
position to the forward direction.
Search the output (coil) in which the relay address of the cursor position
(on A contact and B contact) is being used.
Insert the cell in the assigned area.
Insert the row in the assigned area.
Delete the cell in the assigned area.
Delete the row in the assigned area.
Input the comment in the assigned line.
Enlarge the display of the ladder program
Contract the display of the ladder program
Move the cursor to the front row of the window.
Move the cursor to the unwritten row for the ladder program, and for
mnemonic program, the cursor is moved to the row of NOP instruction.
Move the cursor to the assigned row.
Move the cursor to the line of address mark which has been setup.
Move the cursor to the specified address line.
Check the grammar and format of the ladder program.
Convert the address number such as relay or register in batch.
Replace A contact with B contact, or vice versa, at the point equal to the
relay address of the specified contact.
[Assign Symbol] window is opened. Here, the symbol that was input by
the ladder program is assigned to the address.
Command
Undo
Cut
Copy
Paste
Image Copy
Find
Find Previous
Find Next
Find Coil
Insert Cell
Insert Row
Delete Cell
Delete Row
Create Line Comment
Zoom [Zoom(＋)]
Zoom [Zoom(−)]
Jump [T
o Top Row]
Jump [ T o Unedited Row]
Jump [ T o Assigned Row]
Jump [ T o Address Mark]
Jump [To Program Address]
Program Check
Converts Data in Batch
Replacement NO and NC
Assigns Symbol