Instruction manual

Chapter 9 Print (Page Setup)
9・6
③
[3] Setup Page of System
If you click [Page Setup] by the [File] menu (page 9-1) of the system, the [System Print Setup] dialog
box will be displayed.
①
②
※ By clicking [Reference] (number ①) of each item, you can assign the file name by
[Select File] dialog box at the title/header/footer. (Same as the pages 9-3 to 4)
Also, the file for title/header/footer is created by clicking [Boot HF Editor] (number
2 above) (⇒Refer to "9-2 HF Editor")
If you click [OK] (number 3 above) after setting up each item, the setup content will be registered.
Content
Setup items
Title
Header
Footer
Start address
to print
End address to
print
Unit to print
Print format
Comment
Margins
Boot HF Editor
If you want to print the title, select "Attach," and if you don't want to print the title,
select "None." Assign the file name if you select "Attach." ※
For each page, select "Attach/None" (as explained above) in printing the header.
Assign the file name if you select "Attach." ※
For each page, select "Attach/None" (as explained above) in printing the footer.
Assign the file name if you select "Attach." ※
Assign the system memory address that starts the printing.
・It is valid when selecting "None" at comment (described below), or when selecting the "Comment" at comment.
Assign the system memory address that quits the printing.
・It is valid when selecting "None" at comment (described below), or when selecting the "Comment" at comment.
Select the unit (byte/word/double word) for printing system memory data.
・It is valid only when selecting the "Comment" at comment (described below).
Select the type(binary notation/octal notation/decimal notation/hexadecimal
notation/ASCII) for printing system memory data.
Start-up "HF Editor" that creates title, header and footer.
Setup spaces of top/bottom/left/right sides.
Select the "print comment" of the system memory from "None /Comment
/Property Sheet."
・If "None" is selected, the area to print in one page enlarges.
・If "Property Sheet" is selected the content of the property sheet will be printed.